VENTURE

Speedograph Richfield

Synonymous with Quality Speed Products.

Two series of tachogenerators, LDG and MDG, are available for use either with M series tachometers or as a source of a.c Voltage for speed control applications

Single and 3 Phase Generators

LIGHT DUTY TACHOGENERATORS (CODE LDG)

The LDG series are brushless 3-phase generators using permanent magnet rotors supported by ball-race bearings.

The RMS output voltage is directly proportional to the rotational speed of the drive shaft, irrespective of the direction of rotation.

The tachogenerators are available in three mechanical drive configurations:

LDG1-1

3-hole flange mounting, direct drive onto generator shaft.

1 Volt per 100 RPM

LDG1-1 + LDG121

Bracket (Pedestal) mounting, direct drive onto generator shaft.

1 Volt per 100 RPM

(Bracket kit LDG121).

LDG3-1

Bracket (Pedestal) mounting, flexible drive cable to slot in generator shaft.

1 Volt per 100 RPM

(Bracket kit LDG131)

SPECIFICATION

Input Speed:                    400 RPM minimum  /  6000 RPM maximum continuous

Starting torque:               288 gm/cm (.33 lb/ft)

Output Voltage:              1V per 100 RPM

Current:                           30 mA per phase maximum

Recommended cable:     3 / 0.029 T.R.S. or P.V.C. industrial 3 core

Terminations:                  2BA screw terminals. Access through gasketed cover with    M20 X 1.5 conduit entry                                                                          With nylon cable gland                                                                                                                                                                                          Environmental                  Weatherproof and unaffected by external ferrous materials.

Temperature range          – 40 to +120 degrees Celsius

Weight                                1.4 kg (3lb)      

MEDIUM DUTY TACHOGENERATORS (CODE MDG)

The MDG series of tachogenerators is designed to withstand more rigorous conditions than the LDG series.

The output of these generators is single phase A.C. up to 60 Volts r.m.s.

	MDG27	MDG28	MDG29	MDG35
Input Speed Range RPM	500 - 1000	1000 - 1500	1500 - 3000	3000 – 6000
Output Voltage per 100 RPM	6V	4V	2V	1V

Current:                               15 mA

Recommended cable:          3 / 0.029 T.R.S. or P.V.C. industrial 3-core.

Terminations:                       2BA screw terminals. Access through gasketed cover  with                                                                                      5/8 x18 t.p.i. conduit entry.

Environmental:                    Weatherproof and unaffected by external ferrous materials

Temperature range:            - 40 to +120 degrees Celsius

Weight:                                 2.835 kg (6.1/4 lbs)

Speedograph Richfield Automotive division

[Industrial Instruments] [Mechanical Tachometers] [Electrical Tachometers] [Drive systems] [Instrument Drives] [Accessories] [Flex Drives] [Service and repair] [Magnetic Particle Clutch] [Perception Heads] [Generators] [Contact Us]